Area of use
Prebona DuraClean makes surfaces of concrete, stone, plaster, clay, glass and wood dirt repellant. Surfaces are easily cleaned and will stay clean for a long time.
Surface to be treated should be clean and dry. Before treatment, a non-visible area should be treated to test for possible discoloration. Apply with low pressure spray. Temperature should be above +5○ and no presipitation. Avoid direct sunlight. Avoid contact with metal surfaces such aluminium, copper and steel as there is risk for discoloration. Use protective clothing, respiratory protection, goggles and protective gloves.
If exposed to eyes, rinse with water for several minutes. If exposed to skin, rinse with water. If irritation occur, contact physician.
Apply until surface is wet but not dripping. Normal dosage is about 0,1 liter per m2 in one application. If surface is very porous, a second application may be necessary.
5% SiO2 in water. Surfactant.
Storage and shelf-life
Store in dark continer of non-corrosive material, such as plastic, and above freezing at 5 – 35○C. Should be used within 6 months from production date.
Container is disposed as plastic. Spillage and left-over should be handeled to avoid exposure to environment.
Prebona DuraClean is available in the following packaging:
• 25 liter black plastic container
• 1000 liter black IBC
Only for professional use.
Prebona DuraClean Downloads
Prebona DuraClean Presentations (Swedish)
Prebona DuraClean Flyer
Prebona DuraClean Info sheets (Swedish)
Prebona DuraClean Brochures (Swedish)
Treatment of unpainted wood – Brochure (Swedish)
Prebona DuraClean Case stories
26 roofs with concrete tiles (Swedish)
Repairing frost damaged brick façade on school (Swedish)
Tiled roofs (Swedish)
Bitumen roofs (Swedish)
Wooden decks (Swedish)
Concrete paving (Swedish)
Horse stable (Swedish)
Material Safety Data Sheet (MSDS)
Technical Data Sheet